Top 9 Best Reciprocating Saws 2018

Buying Guide

Reciprocating saws are popular for construction, plumbing, HVAC, and electrical jobs. In addition, their use will depend upon the added features purchased with the device. When power tool users intend to purchase the saw, they should consider several factors. For instance, they should decide how much tool movement they will require with the saw in addition to the accessibility of power outlets. Furthermore, users should assess the weight and size of the unit along with the length of time they will usually need it to run. Power tool users should also compare convenience against each unit’s power capabilities.

Best Reciprocating Saws

When professional demolition experts require a saw for their job, they should select a tool with plenty of power. Reciprocating saws are available in cordless versions, which offer more maneuverability and the convenience of shifting around a location without unplugging the device. However, the piece of equipment will begin to lose power as the battery runs low.

With a corded reciprocating saw, power tool users will have the unit’s full power available at all times. When tool consumers purchase a corded device, they will have power that ranges from less than five amps to over 15 amps. As tool shoppers review their options, they should keep in mind that a unit with over 10 amps will provide enough power for jobs that require heavy-duty cutting.

When power tool shoppers need more maneuverability than a corded reciprocating saw can provide, they should purchase a cordless saw with high power levels such as an 18-volt or 24-volt saw. Power tool users may also consider bringing an extra supply of batteries with them during each job to ensure completion. In addition, tool consumers may purchase a unit that receives its power from lithium-ion batteries as they have a longer running time.

When completing work with a reciprocating saw, the job will typically require several hours of continuous work. Therefore, the power tool must offer the most available comfort. In some cases, users may be working with the tool overhead, which can quickly cause fatigue from holding the unit at an upward angle for long periods.

If power tool users work overhead often, then they may find a cord unit lighter as the added battery in a cordless device will increase the power tool’s weight. When working in compact spaces, users will need smaller tools for improved maneuverability. Tool consumers should also look for a saw that features an adjustable blade in addition to a rotating blade or handle. With extra features, they will have a reciprocating saw with a natural grip that they can use at a variety of angles.

Tool consumers should also purchase a saw with a well-balanced design, which will provide greater control while making the saw feel lighter during use. Cushioned grips are also an important addition as they ensure a user’s comfort and will even withstand long sweat-filled jobs. Often, power tools vibrate and increase fatigue. With a reduced vibration feature, users can work with the tool for longer timeframes in order to finish each job quickly. Less vibration also increases the device’s accuracy.

Check out the 9 Best Reciprocating Saws on the market right now:

#1. Milwaukee 0719-22 V28 Sawzall Lithium Ion Cordless Reciprocating Saw Kit

  • The new Milwaukee 0719-22 Sawzall V28 Lithium Cordless Reciprocating Saw Kit, takes the cutting power, performance and reliability pro users and serious do-it-yourselfers have come to expect from Milwaukee, and combines it with the added bonus of cut-anywhere cordless convenience
  • The 0719 Sawzall is powered by a 28-volt Lithium-Ion battery that weighs less than a standard 18-volt Ni-Cad battery, yet delivers twice the run time
  • As a result, you can cut faster and longer with less fatigue and fewer battery changes
  • The tool weighs just 9.4 pounds with the battery installed
  • And the batteries are reversible, a feature that’s exclusive to Milwaukee tools
  • They can slide on from either direction, which allows you to counterbalance the tool’s weight depending on the battery placement
  • The saw’s variable-speed motor has two speed ranges: 0-2,000 strokes per minute (spm), and 0-3,000 spm, allowing you to choose the most efficient cutting speed for the job
  • And the tool’s superior 1 1/8-in. blade stroke ensures fast cutting with less motor strain
  • Other performance-enhancing features found on the 0719 include the Quik-Lok blade clamp for tool-free blade changes, a keyless shoe adjustment, soft-grip handle that dampens fatigue-producing vibration, and a gear-protecting clutch for improved durability
  • And each battery is equipped with an illuminated “fuel” gauge, so you’ll know when recharging is necessary
  • When fitted with the appropriate blade, the saw will cut through virtually any building material, including wood, drywall, plaster, asphalt roof shingles, plastic pipe, nail-embedded wood, copper tubing, fiberglass and most metals

Milwaukee 0719-22Pros: excellent service, this is extremely powerful with long battery life, for heavy demolition, light weight so it is easy to climb with for use overhead, it cuts through just about anything like butter, two 28-volt highest batteries are long lasting, batteries don’t take long at all to charge, easy to change blades, the two finger trigger is a plus, long warranty, its worth every penny …

Cons: would be nice if it was built with LED lighting …

=> Buy-Milwaukee-0719-22-V28-Sawzall-Lithium-Ion-Cordless-Reciprocating-Saw-Kit





#2. DEWALT DC385K2 18-Volt Ni-Cad Cordless Reciprocating Saw Kit

  • The DEWALT DC385K2 18V Cordless Reciprocating Saw Kit offers 1-1/8″ stroke length for faster cutting speed and 0-3,000 spm for faster cutting speed
  • The 4-position blade clamp allows for flush cutting and increased versatility, and the keyless lever-action blade clamp for quick and easy blade changes
  • This recip saw features a pivoting adjustable shoe with open top for maximum visibility
  • It also has a variable speed with trigger lock for increased blade control
  • The anti-slip comfort grip provides increased comfort and control
  • This unit includes (2) 18v XRP extended run-time batteries which provide long run-time and battery life
  • Includes: (1) DC385 Reciprocating Saw, (2) 18V XRP battery, 1 hour charger, kit box

DEWALT DC385K2Pros: great reciprocating saw for homeowner or professional, it works quite well, great for quick projects, plenty of power, not real heavy, cut wood and metal with excellent results, not have to drag around an extension cord, last a long time on a single battery, the quick change blade feature is really nice, variable speed is great …

Cons: bad clamp, the kit did not include a blade …

=> Buy-DEWALT-DC385K2-18-Volt-Ni-Cad-Cordless-Reciprocating-Saw-Kit





#3. Bosch CRS180K 18-Volt Lithium-Ion Reciprocating Saw Kit

  • Compact size makes it easier to get into tight spaces
  • Lightweight tool equals less fatigue
  • 2-speed allows you to adjust to the material your up against
  • Lock-Jaw™ blade holder is the easiest blade change system
  • 1 1/8″ stroke allows for more material to be removed per stroke

Bosch CRS180KPros: good for home projects, it’s sized right and the weight is comfortable, small but powerful, the battery slips nicely into the saw, the battery keeps the saw running long enough for you to complete a task, powerful saw with a nifty blade-change design, the blade release is very easy, two speed options on the blade, the charger and has a power indicator to show you how much battery is left …

Cons: the carry bag is good but a hard plastic case protects it better …

=> Buy-Bosch-CRS180K-18-Volt-Lithium-Ion-Reciprocating-Saw-Kit





#4. Ingersoll Rand 529 Low Vibration Reciprocating Air Saw

  • Featuring a patented vibration reduction mechanism, lightweight construction, quiet design, and ergonomic rubber grip, the reciprocating air saw increases operator productivity and comfort
  • It is the perfect tool, cutting everything from plastics to fiberglass to composites to aluminum and sheet metal

Ingersoll Rand 529Pros: fast shipment, this saw is high-performance, professional tool, a tool for art, it does the job with ease, it cuts through steel and aluminum like butter, motor is quiet, it runs very smooth, vibration free, you could use this for hours with out hand fatigue, the exhaust is adjustable, very low air consumption, the supplied blades are good, worth the cost …

Cons: none …

=> Buy-Ingersoll-Rand-529-Low-Vibration-Reciprocating-Air-Saw





#5. Bare-Tool Milwaukee 2625-20 M18 18-Volt Reciprocating Saw

  • The HACKZALL M18 Cordless One-Handed Recip Saw features a compact and light weight design for superior control and versatility
  • The powerful motor delivers 0-3,000 strokes per minute and a 3/4-Inch stroke length allows for fast cutting through a wide range of material such as wood, metal and PVC
  • The dual gear anti-vibration system increases control and accuracy
  • The 2625-21CT also features a QUIK-LOK blade clamp which offers fast and easy blade changes

Milwaukee 2625-20Pros: quickly shipped, this is a great tool for small jobs, best saw for the money, full sized sawzall version, light weight, very solid, very nice and easy to use, it holds a charge well, one handed operation with great balance, perfect for cutting pipe one handed, great for cutting up any material …

Cons: no complaints …

=> Buy-Bare-Tool-Milwaukee-2625-20-M18-18-Volt-Reciprocating-Saw





#6. Hitachi CR13VBY 12-Amp Reciprocating Saw

  • The Hitachi CR13VBY 12-Amp Reciprocating Saw provides the stability and power any professional or handyman needs from their tool to get the job done correctly and efficiently
  • A reciprocation saw has the back-and-forth motion of a handsaw that lets you quickly cut through various materials while providing versatility in awkward places normal saws won’t go
  • The 12-amp motor and 1-1/4-inch stroke length at 0 to 3,000-SPM results in rapid cutting performance and power control for tough cutting jobs
  • This 1300-max watt saw offers a straight and “swing” mode that produces significantly less rebound effect as compared to traditional orbital action for a more efficient cut in wood materials
  • A variable speed dial and trigger allow the user to adjust the cutting speed optimally for different materials resulting in less waste and more control
  • Hitachi’s CR13VBY 12-amp reciprocating saw features a patented new technology called UVP (User Vibration Protection) that reduces the overall vibration produced by the motor and drastically lessens the vibration transfer to the user of the tool
  • A counterweight mechanism reduces full-load tri-axial vibration by over 65-percent
  • A swing-cutting mechanism located near the blade lessens the “rebound” effect that’s created from a traditional orbital action cut
  • The blade changing system is quick and easy requiring no tools and a simple lever press for quick replacements
  • The ergonomic shape and slip/heat resistant grip is easier to handle and ideal for all day use
  • The triple sealed construction on this reciprocation saw makes it dust and water resistant, protecting and increasing the tools life and performance
  • This tool weighs 9.7-pounds and includes a case and all-purpose blade
  • The Hitachi CR13VBY 12-Amp Reciprocating Saw comes with a 5-year warranty

Hitachi CR13VBYPros: solid construction, tons of power and never seems to struggle, runs smooth, you can cut with pretty good precision, cuts fast, anti-vibration technology works very well, lot less vibration, it has a comfortable grip to it and never runs out of power, great if your running the saw all day, two ways to adjust the speed, it over the cheaper offerings …

Cons: it’s really heavy, the blade change is also annoying …

=> Buy-Hitachi-CR13VBY-12-Amp-Reciprocating-Saw





#7. Makita BJR182Z 18-Volt LXT Lithium-Ion Cordless Reciprocating Saw

  • Makita’s 18V LXT Lithium-Ion Cordless Reciprocating Saw delivers faster cutting and demolition performance to the jobsite
  • The BJR182Z has a high-torque motor with a 1-1/8-inch stroke that is engineered for a range of cutting and demolition tasks
  • The LXT Lithium-Ion Battery (sold separately) makes this reciprocating saw perfect for remote use, where running a cord is not an option
  • The BJR182Z features a Makita-built high-torque motor with a 1-1/8-inch stroke that cuts 0-2,900 strokes per minute (SPM) for faster cutting
  • The BJR182Z has a maximum cutting depth of 5-1/8 inches for pipe, and 10 inches into wood (using a 12-inch blade)
  • The BJR182Z also features an electric brake for productivity
  • The BJR182Z weighs just 7.7 pounds (with battery, sold separately) with a more compact design at 17-3/4 inches long and an ergonomic shape that fits like a glove for reduced operator fatigue
  • The BJR182Z is engineered for the pro that wants more features, and is perfect for a range of applications including plumbing, flooring, electrical, demolition, and for general contractors who require a best-in-class engineered cordless reciprocating saw

Makita BJR182ZPros: fast shipping, great saw for the weight and price, it’s strong for a cordless, t performs like it is corded not cordless, no more worrying that my cutting angle coming too close to the cord, battery life good, charging super fast, really powerful and has a good grip …

Cons: batteries are not interchangeable, batteries are expensive …

=> Buy-Makita-BJR182Z-18-Volt-LXT-Lithium-Ion-Cordless-Reciprocating-Saw





#8. PORTER-CABLE PCL120CRC-2 12-Volt MAX ClampSaw

  • Porter-Cable’s PCL120CRC-2 12-volt Max ClampSaw is a reciprocating saw that combines a manageable size, light weight, and serious speed
  • This combination plus its rich feature set means that this saw is ideal for cutting a wide variety of materials and also ideal for cutting in small spaces or confined environments that many saws wouldn’t work within
  • Porter-Cable’s PCL120CRC-2 12-volt Max ClampSaw has an innovative adjustable clamping shoe, which adds another level of cutting accuracy and helps to increase job speed
  • This reciprocating saw delivers 0 to 3,000 strokes per minutes (spm) while maintaining a 5/8-inch stroke
  • This rapid sawing also helps ensure that projects are done more quickly
  • With a tool-free blade release to make blade changing both easier and faster, Porter-Cable’s PCL120CRC-2 12-volt Max ClampSaw reduces task time
  • To help even more, it has an LED worklight to keep cutting accuracy high even in sites with dim or low light
  • This saw features a 3-position pivoting handle that rotates 45 and 90 degrees, delivering flexibility even in restricted spaces and a variable speed trigger to adjust speed as needed
  • Its 12-volt lithium ion battery provides the power needed to get the job done

PORTER-CABLE PCL120CRC-2Pros: it comes with two 12 volt lithium batteries, batteries charge fast about a half hour, excellent tool for small jobs, fits easily into small areas, great for easy yard work, great for taxidermy work and light metal work, best tree trimmer and pipe cutter, its versatile, very handy, quick change of saw blades, variable speed trigger …

Cons: batteries are small in capacity, it in no way replaces the big power house 18 volt …

=> Buy-PORTER-CABLE-PCL120CRC-2-12-Volt-MAX-ClampSaw





#9. Chicago Pneumatic CP7900 Heavy Duty Reciprocating Air Saw

  • The CP7900 Air Reciprocating saw is a versatile tool for cutting intricate vshapes in light radius curves in all types of plastic, fiberglass, composites, aluminum and sheet metal
  • This tool features a lock off throttle for protection against accidental start ups and an adjustable guard
  • Rear exhaust directs air away from the work area, while an ergonomic design increases comfort and handling
  • Strokes per minute: 10,000; air inlet thread: 1/4-Inch NPTF; minimum hose size: 3/8-Inch; sound dBA: 92; length: 8.5-Inch; weight: 1.3 lbs
  • The tool comes with 3 replacement blades: 18 tooth, 24 tooth, and 32 tooth

Chicago Pneumatic CP7900Pros: best cheap air saw, its well built, perfect tool for a panel beater, easy handled, low vibration, low noise level, smooth and efficient, makes precision cut with ease, you can cut plywood, sheet rock, thin metal,plastics, fiberglass …

Cons: blades are pricey, the blades will not last long if you are cutting metals

=> Buy-Chicago-Pneumatic-CP7900-Heavy-Duty-Reciprocating-Air-Saw