Top 11 Best Table Saws 2018

Buying Guide

Let’s begin by talking about the four main types of table saw. There are four main types of table saw: bench top table saw, contractor saws, hybrid saws, and cabinet saws. Each of these is meant for a different type of work and a different type of working environment. Also, each is meant for a different amount of use and especially different degrees of accuracy in the cuts.

Best Table Saws

1. Bench top Table Saws

Just as the name implies bench top table saws don’t have legs. They are meant to be put on a work bench when used. The reason is they’re semi-portable. This is the type of saw you would put in the back of your pick up and take to a job site for a day of cutting outside trim. This is not the kind of saw you would set up on a workshop where you would be making craftman-level furniture. Bench top table saws work great for what they’re designed for. What they’re not is extremely accurate. For that you’ll need another type of saw.

2. Contractor Table Saws

Contractor table saws are sort of like bench top table saws, but with legs. The idea behind most contractor saws is they’re somewhat portable, but they’re also meant to be left on-site during a period of time. If you have a job as a finish carpenter, then this might be the type of saw you would take to a job site. Contractor saws usually cost a little more than bench tops. They’re not as portable. And they’re usually somewhat more accurate. But still not as accurate as you would need for fine furniture.

3. Cabinet Table Saws

Want to make fine furniture? If so, then this is the type of saw you need. Be prepared to pay some money, though. Good quality cabinet saws cost a few thousand dollars. Also, they’re not at all portable. Accuracy and the size of the table are the two issues here. A machine tool normally looses accuracy the more it is moved. Cabinet saws are meant to be put in place and not moved.

4. Hybrid Table Saws

Looking for a cross between a cabinet saw and a contractor saw? Hybrid table saws are saws that try to answer all problems at once. Some are good, others not. Don’t expect the hybrid saw to be as accurate as a good quality cabinet saw.

Table saws can do all types of cutting. They can crosscut (cut against the grain), and also rip, (which means cutting with the grain). You’ll probably use different blades for each of these, but the main idea is the same. A good table saw can also square, miter, groove, shape, and join pieces of wood. Using a quality table saw can make virtually any woodworking project much, much easier.

Table saws are just that, a table with a saw sticking up out of the middle of it. The work surface is made of heavy duty metal. You can raise and lower the blade. You can also angle the blade. Most of your better saws have some sort of set up for dust collection. One thing you want to keep in mind is the size of the saw’s motor. It should be strong enough to cut hardwoods with little to no vibration of the wood and the saw.

Check out the 11 Best Table Saws on the market right now:

#1. SawStop PCS31230-TGP236 Professional Cabinet Saw, 3 HP, 10-inch

  • Ideal for both craftsmen and hobbyists, the SawStop 3.0 horsepower Professional Cabinet Saw (model PCS31230-TGP236) delivers the performance you need with the peace of mind only SawStop’s patented safety system can provide
  • The safety system detects when someone accidentally contacts the spinning saw blade, and then stops the blade in milliseconds — resulting in just a nick on a SawStop saw instead of the devastating injury
  • Built to satisfy the toughest expert users, the Professional Cabinet Saw features superior dust collection and an exacting fit and finish
  • This model comes with a 36-inch T-Glide fence system for added strength and increased precision as well as rails and extension table
  • The Professional Cabinet Saw provides 99 percent dust collection both above and below the table
  • Above, the dust collection blade guard (included) traps and evacuates fine particles left on the table surface
  • Below the table, advanced shrouding shapes the turbulent air from the blade to deliver dust to the 4-inch port for collection
  • The optional TSA-ODC Overarm Dust Collection accessory helps carry the DC blade guard’s collected dust away and unites it with the 4-inch port on the back of the saw
  • Other features include a riving knife that minimizes kickback and provides protection during non-through cuts, and a left-tilting blade that helps prevent wood from binding against the fence
  • The Professional Cabinet Saw has a 220-volt power requirement, making it great for avid hobbyists and discerning professionals
  • For mobility, the optional MB-PCS-000 integrated mobile base offers quick and easy mobility, with two pivoting and two stationary casters
  • You can also upgrade to the optional MB-PCS-IND mobile base assembly, which features a 1,000 pound lift capacity, four independent pivoting casters, and a hydraulic piston lift
  • The SawStop safety system includes an electronic detection system that detects when a person contacts the blade

SawStop PCS31230-TGP236Pros: it is powerful and most of all, one of safest table saws on the market, perfectly adjusted for everything, 36″ pro fence is so great, 3 HP saw cuts through wood like butter, drive system is so smooth, making for vibration free operation, ease and accuracy, blade guard and riving knife work so well, the fence gauge only needed the tiniest adjustment, the wings fit perfectly, it’s worth your every penny, well designed, fantastic instructions, assembled very quickly …

Cons: high-end table saw with high price but you will not be disapointed, design issue on the ICS which is not on the PCS

=> Buy-SawStop-PCS31230-TGP236-Professional-Cabinet-Saw





#2. Powermatic 1792002K PM2000 Cabinet Saw, 3 HP, 10-Inch

  • Powered by a three-horsepower, one-Ph motor, the award winning Powermatic PM2000 10-Inch Cabinet Saw sets a new standard for innovation with an array of patented features and massive body design
  • It boasts the heaviest cast-iron base in its class to virtually eliminate table vibration, oversized cast-iron tables, and a push-button arbor lock that’s conveniently accessible from above the table top
  • Designed with input from professional woodworkers, the PM200 provides incredible quality, efficient functionality, and long-term durability
  • Its refined, heavy-duty trunnion mechanism features super-rigid, box-style cast-iron construction, high-end bearings, and a conical-shaped, worm gear drive with an increased contact area to enhance the smooth, solid feel of the tilt and height adjustment
  • The full-length 5/8-inch diameter arbor is precision machined from stress-proof steel to exceptionally high tolerances for accuracy
  • It accepts stacked dado sets up to 13/16-inch wide, and because there is no gap between the threads and arbor shank, thin chippers won’t hang out of line
  • All the high-luster, cast-iron surfaces are finely ground to ensure a smooth, mar-free work surface that provides more support for the big jobs
  • The PM2000 also comes equipped with a newly designed magnetic On/Off switch for safety
  • The PM2000’s blade guard and riving knife system can be adjusted tool-free for the job at hand
  • An industrial-duty 30-inch Accu-Fence System ensures accurate cuts, while adjustable angle indicators on the blade bevel scale for repeatable bevel cuts
  • inally, to facilitate movement in and around the shop, the massive cast iron base has a built-in retractable, four-wheel caster system

Powermatic 1792002K PM2000Pros: outstanding customer service, the polished handwheels operate smoothly and effortlessly and look good in their finish, high quality, dependable, fit and finish is outstanding, the easy sliding 30” fence is remarkably accurate and easy to adjust, 3 hp motor that is available for this saw, one of smothest cutting saws, the heavy weight contributes to the relative silence of the running blade, the arbor lock is great for changing the blade, the dust chute works good …

Cons: it would have been nice if the power cord was an extra x” longer, the standard throat plate supplied is a bit twisted …

=> Buy-Powermatic-1792002K-PM2000-Cabinet-Saw





#3. Sawstop CNS175-TGP36 Contractor Saw, 1-3/4 HP, 8-Inch

  • The SawStop Contractor Saw offers versatility and safety in the shop and stability and mobility on the jobsite
  • It delivers the performance you need with the peace of mind only SawStops patented safety system can provide
  • The SawStop table saws unique brake design detects hand or finger contact with the saw blade within milliseconds, instantly stopping and retracting the blade, helping to avoid serious injury
  • In addition to the groundbreaking safety features, SawStop manufactures one of the most precise saws on the market
  • The fit, finish and tolerance levels are second to none
  • The Professional T-Glide Fence System gives added strength and increased precision to the Contractor Saw
  • Includes: 1-3/4 HP Saw with stand, 36″ Professional T-Glide Fence System, table extension, two adjustable legs, 10″ 40-tooth combination blade, two stamped wings, blade guard assembly, miter gauge, riving knife, blade wrenches and owners manual

Sawstop CNS175-TGP36Pros: excellent quality and service, safe and precise table saw, the safety factor of the braking system is reassuring, awesome performance, the motor is smooth on start up and quiet, the table is very stable, T-Glide fence is solid, well designed and engineered, the directions come on big, clearly written …

Cons: it didn’t include the instructions for moving the rear trunnion, the miter gauge isn’t tun-able

=> Buy-Sawstop-CNS175-TGP36-Contractor-Saw





#4. Shop Fox W1820 Table Saw, 3 HP, 10-Inch

  • Every part of this saw says quality and performance
  • From the heavy cast iron trunnions, 3 HP Leeson motor and triple belt drive to the massive cast iron table and wings, this table saw is built to last a lifetime
  • You’ll also appreciate the camlock T-fence, riving knife, heavy cast handwheels, magnetic switch, T-slot miter gauge with fence extension and flip stop and 4-inch dust collection port
  • A true riving knife follows the up and down and tilt movement of the blade
  • Features an extra 50-inch rip capacity, more than enough to rip to the center of a standard sheet of plywood, long extension table with adjustable legs, square steel tubing frame and dimensionally stable top

Shop Fox W1820Pros: free shipping, great saw with nice handwheels, the trunnion is massive, powerful saw with a heavy duty table and rip fence, it’s easy to adjust and took minimum time to get square to the blade, the blade was true and straight so don’t have to adjust any parts at all, the saw comes with an excellent miter gauge, no problem with the extension table and easy to adjust …

Cons: the dust collection is good but not the best, it needs a zero clearance plate …

=> Buy-Shop-Fox-W1820-Table-Saw





#5. Grizzly G0690 Cabinet Table Saw, 3 HP, 10-Inch

  • Every part of this saw says quality & performance
  • From its heavy cast iron trunnions, 3 HP Leeson motor & triple belt drive to its massive cast iron table & wings, this Table Saw should last a lifetime
  • You’ll also appreciate its camlock T-fence, riving

Grizzly G0690Pros: shipped very promptly, great value and a great saw, it’s solid, tuned perfect out of the crate, with a high quality blade on it, made woodworking so much more easy because it rips completely effortlessly, the riving knife is extremely helpful in preventing burnout, the fence and rails were easy to install and align, fence is as smooth and accurate, it’s heavy enough to make precise cuts, easy to maintain and to adjust, cleaning is easy because there is very little saw dust …

Cons: consider getting a better sliding rail, do not use the tape scale that comes with this saw

=> Buy-Grizzly-G0690-Cabinet-Table-Saw





#6. Jet Proshop 708494K JPS-10TS Tablesaw, 1-3/4 HP, 10-Inch

  • The JET ProShop Table Saw offers features you expect from a high-end cabinet saw, in the compact design of a contactor-style machine
  • The saw comes with your choice of stamped steel or cast iron wings
  • The transparent blade guard has independent leaves, and the quick release riving knife reduces chance of kickback
  • A low profile riving knife is included for non-through cuts
  • The exclusive ProShop fence system is available in 30” or 52” rip capacity

Jet Proshop 708494K JPS-10TSPros: the saw arrived pretty quickly, it is very smooth, the saw has plenty of power, cuts heavy wood, assembly of the saw was easy, the saw exhibits very little vibration when turned on, the cast iron wings are definitely preferable to the stamped steel wings, 52” cast iron is heavy but very stable, it didn’t take too long to square up the blade and fence, saw blade alignment is outstanding …

Cons: the dust collection system does not work very well, the fence is not the best, the miter gauge isn’t great …

=> Buy-Jet-Proshop-708494K-JPS-10TS-Tablesaw





#7. Delta Power Tools 36-5052 Delta Left Tilt Contractor Saw, 15 Amp, 10-Inch

  • Unique Tubular Stand for maximum support and stability
  • Heavy duty one piece rail system for precision cuts every time
  • Blade Brake stops the blade within seconds of the power being turned off
  • Heavy duty RH extension board with support legs
  • Large, easy to access ON/OFF switch

Delta Power Tools 36-5052Pros: shipping was excellent, quality, great Delta saw for home users and contractors, mechanicals function well, the on and off switch is simple to find which helps to make sure you are safe, rugged and smooth performance, set up was straight forward and quick, the rail keeps your cuts nice and straight and the saw cuts through the wood like butter, really beautiful precise cuts, it was easy to align the fence to the miter slot, well designed, sturdy and heavy, the legs and the wheels went on rather smoothly …

Cons: the biggest problem is that the instructions do not match the hardware (maybe youtube can help)

=> Buy-Delta-Power-Tools-36-5052-Delta-Left-Tilt-Contractor-Saw





#8. DEWALT DW744XRS Job Site Table Saw, 15 Amp, 10-Inch

  • The DEWALT versatile 10-Inch Jobsite Table Saw with Rolling Stand pairs a portable design with a powerful 15 amp motor and a max rip capacity of 24-1/2 inches
  • Offering application-specific setups with the Site-Pro Modular Guarding System, this saw comes with a miter gauge, a push stick, and a 10-inch, 24-tooth carbide blades, and compact rolling stand for easy transport
  • Thanks to a 15 amp, high-torque motor, this DEWALT table saw delivers the power you need for tough jobs like cutting hardwood and pressure-treated lumber
  • The saw’s 10-inch blade spins at a no-load speed of 3,650 rpm for quick, clean cuts
  • Built-in electronic feedback helps the saw maintain consistent blade speeds, so cut quality remains consistently high–even when you’re tackling the toughest applications
  • The saw’s exclusive fence configuration enables a huge 24-1/2-inch rip capacity
  • In addition to offering large rip capacity, this saw can cut dados up to 13/16-inch wide
  • It features a maximum cut depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees
  • And a big 26-1/2 by 19-1/4-inch table surface provides the support you need when working with large applications
  • This DEWALT table saw weighs just 58 pounds which, makes for easy setup and tear down
  • You can move it from your workshop to the worksite with ease
  • This DEWALT features a rolling stand that makes transporting the saw around the worksite easy

DEWALT DW744XRSPros: excellent portable job site table saw, a must for any handyman, best in its class, good buy for the purchase price, the stand makes transporting convenient, you will love the small storage footprint with the rolling stand, compact and does the job very well, easy set-up and stores easily, well designed, fence is square, it cuts like a charm and smooth, measures exactly, moves easily, smooth operation …

Cons: maybe bad fence alignment from factory, the miter gauge doesn’t slide without binding in the slots on the table, doesn’t have a slide-out side or back table extension …

=> Buy-DEWALT-DW744XRS-Job-Site-Table-Saw





#9. Bosch 4100-09 Worksite Table Saw, 4 HP, 10-Inch

  • The Bosch 4100 Table saw offers radical new features and enhancements that make the 4100-series a precise, durable and high-performing table saw
  • The 4100 features the industry’s first-ever modular smart guard system
  • Other innovations include a super-durable sub-base with carry handles, Bosch-exclusive SquareLock Rip Fence with auxiliary fence slots, and a t-slot miter gauge
  • With all these features, the new 4100-Series 10-inch portable table saw will keep Bosch at the top of the category
  • The Bosch modular smart guard system is a ground-breaking new design for portable table saws that includes a blade guard, riving knife, and anti-kickback pawls
  • All three elements are modular and tool free, so users can quickly and easily remove or add each component independently based on the task
  • The blade guard is particularly user-friendly with a new split-guarding innovation that offers optimal line of sight and maximum protection
  • The riving knife prevents material from pinching the blade and offers positions for: full upright, “splitting,” and “non-thru” cutting
  • For professional tools, durability is an essential component of jobsite value
  • The 4100 is jobsite proven with a super-durable sub-base complete with integrated carrying handles for quick and easy transport
  • Other improvements include a single-point bevel movement for consistent accuracy, t-slot miter system, and enhanced dust collection
  • The 4100 also offers Constant Response Circuitry with Soft Start for smooth ramp up speed and to maintain speed under load
  • At 29 by 21-1/2-inches square, the table saw provides the most usable tabletop space available with a 25-inch rip capacity that can easily handle sheet goods or larger stock
  • The arbor lock system makes blade changes quick and easy
  • On-board storage for accessories and the Smart Guard System makes it easier to move between jobs

Bosch 4100-09Pros: great price and quick delivery, good portable table saw, excellent choice for limited space or you need a mobile saw, right out of the box all assembly instructions of the gravity rise stand were perfect, works great for your purposes, adjustments and movements are great, the material fit and finish is well made with it, very stable and easy to fold, it’s pretty quiet, decent push stick for a freebee …

Cons: the blade that came with it is fine but not for finished cuts or smooth ripping, fence sticks a little, short cord …

=> Buy-Bosch-4100-09-Worksite-Table-Saw





#10. DEWALT DWE7491RS Jobsite Table Saw, 15 Amp, 10-Inch

  • The DEWALT DWE7491RS 10-inch Jobsite Table Saw with 32-1/2 inch (82.5cm) Rip Capacity and a Rolling Stand features a rack & pinion fence system which makes fence adjustments fast, smooth and accurate
  • The 32-1/2 inch rip capacity easily cuts a variety of larger shelving and trim materials – the patented material support allows this to be used for narrow rip cuts
  • This unit features a 15 amp motor which quickly rips through hardwoods with ease
  • The telescoping fence rails easily extend and retract to create a small portable package and the flip-over ripping fence allows for narrow rip cuts
  • This saw offers 3-1/8 inch depth of cut at 90 degrees and 2-1/4 inch at 45 degrees
  • A 2-inch dust collection port easily connects to a vacuum for efficient dust extraction to keep clean up at a minimum
  • The rolling stand is designed for easy set up and breakdown with excellent stability, and features large heavy duty wheels that easily roll over steps, curbs, and jobsite debris
  • The 26-1/4 inch X 22 inch table provides superior material support
  • This unit features an on-board storage system which provides easy access to the Site-Pro Guard components and push stick when not in use

DEWALT DWE7491RSPros: great price, delivered as promised, one of best portable saws for the money, jobsite performance and portability, the stand will save your back from dead lifting and stores vertical in your trailer or garage, convenient as it gets, very good folding design, best for home owner with limited shop space, fence is really nice and stays even front to back, its very stable when in use, needed very little adjustment out of the box, accurate, sturdy legs, guard dust port solution …

Cons: no available out feed and side extensions for this saw

=> Buy-DEWALT-DWE7491RS-Jobsite-Table-Saw





#11. Makita 2705 Contractor Table Saw, 15 Amp, 10-Inch

  • Powerful 15.0 AMP motor delivers 4,800 RPM
  • “Tool-less” modular blade guard system with an adjustable riving knife/spreader
  • Blade guard assembly with cam lock provides easy “tool-less” installation or removal
  • Adjustable dual side guards allow for ease of measurement from the blade to the rip fence for cutting set-ups
  • Two onboard independent stowable anti-kickback pawls and riving knife/spreader for through cuts
  • Release lever for easy riving knife/spreader height adjustments into 3 different positions for through, non-through and dado cuts
  • Guard design allows operator to view the blade as it contacts the material
  • Right extension table allows for greater cutting capacity with the capability to rip 4×8 sheets of plywood
  • Aluminum die cast, precision machined table top remains flat and true for out of the box accuracy
  • Large cutting capacity (3-9/16″” at 90° and 2-1/2″” at 45°) can rip 4x material in one pass; can use up to a 13/16″” dado blade
  • Electric brake for maximum productivity
  • Extended capacity with up to 25″” ripping
  • Large on/off switch and easy to read scale for faster adjustments

Makita 2705Pros: it work just like a charm, well engineered and built, this saw comes with the great rip fence that makes accurate, rip fence slides smoothly, the table extension extends very squarely, if you like a large table to support your lumber, it will serve you better than any other in its class, it’s bigger and heavier than the other portable saws …

Cons: for some reason the scale didn’t line up, will not adjust to 45 deg cuts because something holds it back …

=> Buy-Makita-2705-Contractor-Table-Saw